Searching By Specifying The Ip Address And Projector Name (For Advanced Connection Mode Only) - Epson EB-Z8050W Operation Manual

Searching by Specifying the IP Address and Projector name (For Advanced Connection Mode only)

In the following explanations, unless otherwise noted, Windows screen
shots are used.
You see a similar screen even when using Macintosh.
Procedure
A
Click "Manual search" on the EasyMP Network Projection
projector selection screen.
B
Enter the IP address or the Projector name for the projector
you want to connect to, and click "OK".
The search results are displayed on the EasyMP Network
Projection projector selection screen.
Provided the target projector has been identified, select that
projector, and then click Connect to establish a connection.
When you will always be using that projector, save the search as
a Profile, so that you do not have to specify the relevant details
every time you perform a search.
When you use Manual search in Quick Connection Mode, you can
q
specify the SSID. When there are a lot of projectors you can
narrow the search field by using SSID.
31
p.32
s