When A Connection Is Made Using Easymp Network Projection, A Powerpoint Slide Show Cannot Be Started; When A Connection Has Been Made Using Easymp Network Projection, The Screen Will Not Be Refreshed When Using An Office Application; Error Message When Starting Up Easymp Network Projection - Epson EB-Z8050W Operation Manual

Troubleshooting
Check
Is WEP encryption effective, or are multiple projectors connected? The display speed decreases when WEP encryption is effective or multiple projectors are connected.
Have you enabled DHCP?

When a connection is made using EasyMP Network Projection, a PowerPoint Slide Show cannot be started.

Check
Was EasyMP Network Projection started while PowerPoint was
running?
For Windows

When a connection has been made using EasyMP Network Projection, the screen will not be refreshed when using an Office application.

Check
Is the mouse moved continuously?

Error message when starting up EasyMP Network Projection

Error Messages
Connection to the projector failed.
The keyword does not match. Re-enter the keyword displayed on
the projector screen.
When DHCP is set to On in Advanced Connection Mode or Wired LAN connection, if an available DHCP server
is not found, it takes time to enter LAN standby status.
When connecting with EasyMP Network Projection, make sure you close PowerPoint first. Slide Show might not
run if connecting while PowerPoint is running.
When you stop moving the mouse cursor, the screen is updated. If the screen does not update quickly, stop
moving the mouse cursor.
Try to connect again. If it still does not connect, check the network settings on the computer and the network
settings for the projector.
For details on the network settings to be made on the projector, see s
Z8050W only)"
Check the Projector keyword displayed on the LAN standby screen, and enter the Projector keyword.
Remedy
Remedy
Remedy
Remedy
User's Guide "Network Menu (EB-
53