Cannot Connect In Advanced Connection Mode Or Wired Lan Connection; The Slide Show Cannot Be Displayed On The Desired Display When The Multi-Screen Display Function Is Being Executed - Epson PowerLite 825 Operation Manual

Troubleshooting
Check
Is the network cable connected correctly?
For Wired LAN
Cannot connect in Advanced Connection Mode or Wired
LAN connection
Check
Are the SSID settings for the computer, access point, and
projector different?
Are the WEP keys set properly?
Are the connection denial functions, such as MAC Address
restrictions and port restrictions, set correctly at the
access point?
Are the IP address, the Subnet Mask, and the Gateway
Address for the access point and the projector set
correctly?
Are the access point and the projector's subnet different? Select Manual search from EMP NS Connection, specify the IP address, and connect.
The Slide show cannot be displayed on the desired display
when the multi-screen display function is being executed.
Check
Are you using PowerPoint 2002 or an earlier version?
For Windows
Check that the network cable is connected correctly. Reconnect it if it is not connected or not
connected properly.
Set the computer, the access point, and the projector to the same SSID. See your User's Guide for more
information.
When selecting WEP from Security, set the access point, the computer, and the projector to the same
WEP key. See your User's Guide for more information.
Set the projector to allow connections from the access point.
When not using a DHCP, adjust each setting. See your User's Guide for more information.
p.34
s
To set and use two or more virtual displays, use PowerPoint 2003 or later, or limit the number of
virtual displays to one before displaying the Slide show.
Remedy
Remedy
Remedy
61