Wireless Lan Menu (Only When The Supplied Or Optional Wireless Lan Unit Is Inserted) - Epson EB-1925W User Manual

List of Functions

Wireless LAN menu (only when the supplied or optional Wireless LAN unit is inserted)

Sub Menu
Wireless LAN Power
Connection mode
Wi-Fi Protected Setup
Wireless LAN system
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
Turn On when connecting the projector to the computer over wireless LAN.
If you do not want to connect via wireless LAN, turn it Off to prevent unauthorized access by others. This is set to On by default.
When the projector is connected to a computer with EasyMP Network Projection, set so that it is in a permanently connected mode.
When using a Wi-Fi Protected Setup compatible access point via a wireless LAN, you can easily connect the projector to the access point and make
security settings.s p.107
Sets the Wireless LAN system. When set to Auto, whichever of the 802.11g, 802.11b, and 802.11a standards that is compliant to your environment
is automatically selected. (Auto can be set only if Connection mode is set to Advanced.) In an area that does not support 802.11a, only 802.11g/b
is displayed. (802.11a and Auto are not displayed)
g
Enter an SSID . When an SSID is provided for the Wireless LAN system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
Set whether or not (On/Off) to use DHCP
If this is set to On you cannot set any more addresses.
g
You can input the IP Address assigned to the projector. You can enter a number from 0 to 255 in each field of the address. However, the
following IP Addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
g
You can input the subnet mask for the projector. You can enter a number from 0 to 255 in each field of the address. However, the following
Subnet Masks cannot be used.0.0.0.0, 255.255.255.255
You can input the IP address for the gateway for the projector.
You can enter a number from 0 to 255 in each field of the address. However, the following gateway addresses
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Function
g
.
63
g
cannot be used.