Unpacking, Installation, And Transportation; Precautions Of Installation; Unpacking Procedure - Oki S900 Service Manual

2. UNPACKING, INSTALLATION, AND
TRANSPORTATION

2.1 Precautions of Installation

2.2 Unpacking Procedure

2.3 Installation
2.4 Placing the Original
2.5 Transportation
2.1 PRECAUTIONS OF INSTALLATION
Pay attention to the following matters before unpacking and installation.
•
Do not install in a place where vibration may occur.
•
Keep the S900 out of direct sunlight. Do not install near a heat source.
•
Do not place the S900 around materials that shut off the circulation of air.
•
Do not install in a humid or dusty place.
•
Use care not to scratch the glass surface of the S900 or the document holding pad with clips or
staples.
•
Do not use a wall socket on the same circuit as devices that may generate noise, for example, an
air-conditioner, etc.
•
Only use the DC adapter (model name ADP-50ZB made by Delta Electronics, Inc.) included with
the machine. Using other DC adapters may damage the machine and void the warranty.
•
Use a suitable DC power source.
•
Place the S900 on a level surface.
2.2 UNPACKING PROCEDURE
Unpack the S900 according to the following procedure.
•
Remove the packing material.
•
Remove the S900 from the shipping container.
•
Remove the S900 from the PVC bag.
•
Check the items against the following illustration.
•
For any missing items, please contact the nearest dealer or distributor.
Note: Keep all the packing material in case you may need to return the S900.
2-1
S900