Oki S900 Service Manual page 56

Hide thumbs Also See for S900:

Table of Contents

S900

(5)

Remove the flat cable of the optical chassis as illustrated below.

Install the flat cable

with the text facing

(6)

Hold the right side of the optical chassis to remove it gently from the machine. (Be careful not to

touch the CCD board as well as the lamp in the optical chassis.)

•

Note:

While reinstalling the optical chassis, be careful not to touch the chips of the CCD board as well as

the lamp in the optical chassis.

While reinstalling the CCD flat cable, be sure the text of the flat cable faces up as illustrated below.

Any unauthorized action may cause unexpected result and will therefore not be responsible by the

manufacturer.

CCD Board

7-12

Optical Chassis

Lamp

Table of Contents

Troubleshooting