Table of Contents
Advertisement
S900
7.3.4 UPPER HOUSING
(1)
Remove document cover as described in the subsection 7.3.2.
(2)
Remove control panel PCBA as described in subsection 7.3.3.
(3)
Remove the fixing screws of the control panel.
(4)
Remove the bottom housing of the control panel by detaching the hook.
(5)
Loosen the fixing screws at the rear and lift the upper housing gently to remove it.
•
Note:
1.
Before reinstalling the upper housing, clean the glass surface.
2.
Please keep the fixing screws and follow the reverse order to reassemble the upper housing.
The Fixing
Screw
7-6
The hook
connecting
the main unit
Advertisement
Table of Contents
Troubleshooting
