Advertisement
Advertisement
Table of Contents
Related Manuals for Tynetec Reach
Summary of Contents for Tynetec Reach
- Page 1 Reach At-Home Alarm Unit Touch Personal Pendant USER GUIDE www.tynetec.co.uk...
-
Page 2: Important Information
A REN of 4 is the maximum allowed on a standard UK telephone line - the Reach has a REN of 1 If the REN total of all equipment connected to a telephone line exceeds 4 the equipment may not operate REN 1 correctly. - Page 3 confirm a call is being made. The Reach will announce “Pendant alarm – Please wait, dialling for assistance” The Touch pendant battery should last for about 3-5 years depending on use. The battery condition is checked every day, if the voltage falls and stays below a preset level for 7 consecutive days a “low battery”...
- Page 4 POWER LEAD The Reach will usually be table mounted within 3 metres of a mains supply and the master telephone socket. If extension cables are used care should be taken to ensure that no one can trip over the leads.
- Page 5 If extension telephones are fitted they should be connected as shown in section 1.5 above. If you experience connection difficulties or noise on the Reach audio then a poor quality filter may be the cause. Approved filter modules are available from Tynetec – order P/No. W00409.
Need help?
Do you have a question about the Reach and is the answer not in the manual?
Questions and answers