Memory Scan - Simrad RD68 Instruction Manual

Select channel to be enabled
then press and hold Scan

2.12 Memory Scan

Press Adv to manually
advance to the next channel in
the Memory Scan sequence
Note
E03912 Issue 2.0
To re-enable an inhibited channel into the scan cycle, repeat
sequence 2:
(double beep)
Like the Scan function, Memory Scan will cycle sequentially
through the channels, but only those which have been pre-
selected.
➞ Refer to the next subsection 2.12.1 for more information on
preselecting Memory Scan channels.
While in Memory Scan mode, normal VHF functions are not
available. To exit Memory Scan mode, press C or 16.
Instruction Manual
1 2 : 5 5
DSC
INT
S S c c a a n n T/W
E E n n a a M/S
S S c c a a n n
Rx
1 2 : 5 5
DSC
INT
T/W
Hi
Lite M M / / S S
Rx Scan
1 2 : 5 6
DSC
INT
Hi
Lite Adv
M M / / S S Del
Press and
hold
23