Memory Scan - Simrad RD68 Instruction Manual

All manuals and user guides at all-guides.com
To re-enable an inhibited channel into the scan cycle, repeat
sequence 2:
Select channel to be enabled
then press and hold Scan

2.12 Memory Scan

Like the Scan function, Memory Scan will cycle sequentially
through the channels, but only those which have been pre-
selected.
➞ Refer to the next subsection 2.12.1 for more information on
preselecting Memory Scan channels.
Press Adv to manually
advance to the next channel in
the Memory Scan sequence
Note While in Memory Scan mode, normal VHF functions are not
available. To exit Memory Scan mode, press C or 16.
E03912 Issue 2.0
(double beep)
Instruction Manual
1 2 : 5 5
INT DSC
S S c c a a n n T/W
E E n n a a M/S
Rx S S c c a a n n
Press and
hold
1 2 : 5 5
DSC
INT
T/W
Hi
M M / / S S
Lite
Rx Scan
1 2 : 5 6
DSC
INT
Hi
Adv
Lite
M M / / S S Del
23