Appendix; Operating Procedures; Sending A Distress Alert; Acknowledging And Relaying A Distress Alert - Simrad RD68 Instruction Manual

5 APPENDIX

5.1 Operating procedures

WARNING
E03912 Issue 2.0
The following operating procedure summary has been proposed
by the UK Maritime and Coastguard Agency. It is not exhaus-
tive and should not be regarded as a replacement for informa-
tion provided by the proper two-day VHF/DSC training course
required for all UK VHF license holders.

5.1.1 Sending a Distress Alert

1. Send a Distress Alert call (see section 2.7).
2. Wait approx. 15 seconds for a DSC acknowledgment from
the Coastguard or a ship station.
3. On receipt of a DSC acknowledgment, or after about 15
seconds, transmit the following distress call on channel 16:
"Mayday, Mayday, Mayday"
"This is (name of vessel, repeat three times)"
"Mayday (MMSI number and name of vessel or callsign –
Position – Nature of distress – No. of persons on board)"
"I require immediate assistance"
"Over."
If the vessel is not in grave and imminent danger, an All Ships
Urgency call followed by a spoken "Pan Pan" or a routine call
to the nearest Coastguard station may be more appropriate.
It is a prosecutable offense to initiate a Distress
Alert call for any other reason than that the ves-
sel and/or crew is in grave and imminent danger.
5.1.2 Acknowledging and relaying a
Distress Alert
When a DSC Distress Alert is received, an audible alarm will
sound. Immediately cease any transmission that may interfere
with distress traffic and continue a watch on channel 16.
If there is no DSC acknowledgment from a coast station or ship,
after a short interval acknowledge by voice on channel 16:
"Mayday (MMSI of vessel in distress, repeat three times)"
"This is (name of own vessel, repeat three times)"
"Received Mayday (state the assistance you can give)"
"Over."
A similar response should be given to a distress relay, using the
words "Mayday Relay" instead of "Mayday".
Instruction Manual
43