Psion Teklogix 7535 G2 Quick Reference Manual page 47

on the bar code, including the margins on either end of
the symbol.
• If you are using a 2D imaging scanner, make certain the red,
oval-shaped framing mark is centered within the bar code you
want to scan.
• When using imaging scanners, do not move the scanner while
decoding the bar code. Movement blurs the image.
• Hold the scanner farther away for larger bar codes.
• Hold the scanner closer for bar codes with bars that are
close together.
2.6.2 Scan LED Indicators
The 7535 G2 scanner LED (the lower-left LED) indicates whether or
not your scan is successful. The LED behaves as follows:
• Scan In Progress: scan LED displays solid red colour.
• Successful Scan: scan LED displays solid green colour and
turns off when the scan is ended.
• Unsuccessful scan: scan LED flashes red.
A bar code icon appears on the screen during a scan. While the scan-
ner beam is active, the onscreen message states—SCANNING. If the
scan is successful, the bar code data is displayed on the screen until
the scan button (or pistol trigger) is released.
Note: If you prefer not to display the 'SCANNING' message and/or
the bar code data on the screen, these options can be disa-
bled using the 'Scan Indication' and 'Scan Result' parame-
ters, respectively. Refer to the user guide provided with your
unit for details about these parameters.
Psion Teklogix 7535 G2 Hand-Held Computer Quick Reference Guide 41