Hard drive
NOTE:
The hard drive spare part kit includes a hard drive bracket and hard drive connector. The
hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also
available in the Hard Drive Hardware Kit.
Supports the following 9.50 mm, 6.35 cm (2.5 in) SATA hard drives:
Supports the following 9.5 mm / 7.0 mm, 6.35 cm (2.5 in) SATA hard drives:
Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws)
Before removing the hard drive, remove the following components:
1.
2.
Remove the hard drive:
1.
Use the rubber tab on the hard drive bracket (1) to move the hard drive to the left and disconnect
it from the hard drive adapter.
2.
Lift the hard drive (2) out of the hard drive bay.
41)
42)
Component replacement procedures
Meijer.com
634250-001
603785-001
634925-001
634638-001
634862-001
640878-001
43