HP Pavilion G6 Maintenance And Service Manual page 82

5. Remove the fan/heat sink assembly (4) by lifting it straight up.
NOTE:
6.
Turn the system board right-side up, with the front toward you.
7. Disconnect the fan cable from the system board (1).
8. Remove the Phillips 3.0 x 2.0 screw (2) that secures the fan/heat sink assembly to the system
board.
NOTE:
assembly and system board components, it might be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
9.
Follow the sequence embossed on the heat sink to loosen the six Phillips 10.0 x 2.0 captive
screws (3) that secure the fan/heat sink assembly to the system board.
74 Chapter 4 Removal and replacement procedures
Steps 6 through 10 apply only to computer models equipped with AMD processors.
Due to the adhesive quality of the thermal material located between the fan/heat sink
Meijer.com