Power connector
Description
Power connector (includes cable)
Before removing the power connector cable, remove the following components:
1.
Battery (see
2.
Service door (see
3.
Hard drive (see
4.
Optical drive (see
5.
Keyboard (see
6.
Top cover (see
Remove the power connector:
1.
Turn the computer right-side up, with the right side toward you.
2.
Disconnect the power connector cable (1) from the system board.
3.
Lift the power connector (2) from the clips built into the base enclosure.
Reverse this procedure to install the power connector.
62
Chapter 4 Removal and replacement procedures
Battery on page
41)
Service door on page
Hard drive on page
Optical drive on page
Keyboard on page
51)
Top cover on page
53)
42)
43)
45)
Meijer.com
Spare part number
640891-001