Display Assembly - HP Pavilion G6 Maintenance And Service Manual

Display assembly

Description
39.6-cm (15.6-in) High Definition (HD), LED BrightView display assembly:
●
For use in Charcoal Grey computer models
●
For use in Sonoma Red computer models
● For use in Luminous Rose computer models
● For use in Pewter computer models
● For use in Pacific Blue computer models
●
For use in Sweet Purple computer models
●
For use in White computer models
Before removing the display assembly, remove the following components:
1.
Battery (see
2.
Service door (see
3.
Optical drive (see
4.
WLAN module (see
5.
Keyboard (see
6.
Top cover (see
7.
USB board (see
Remove the display assembly:
1.
Turn the computer right-side up, with the front toward you.
2.
Open the computer as far as possible.
3. Disconnect the display panel cable (1) from the system board and remove it from its routing
channel.
4. Pull the antenna cables through the opening in the base enclosure (2), and then disengage the
cables from the clip in the routing channel leading to the display hinge.
CAUTION:
steps. Failure to support the display assembly can result in damage to the assembly and other
components.
5. Remove the five Phillips 6.0 x 2.5 screws (3) that secure the display assembly to the computer.
Battery on page 41)
Service door on page
Optical drive on page
WLAN module on page
Keyboard on page 51)
Top cover on page 53)
USB board on page
Support the display assembly when removing the display screws in the following
42)
45)
47)
60)
Component replacement procedures
Meijer.com
Spare part number
639512-001
639514-001
639515-001
639516-001
639517-001
639519-001
653389-001
63