Warranty And Service - Honeywell Acuix IP Series Installation Manual

Rugged housing and dome
Hide thumbs


Table of Contents
Install in accordance with the manufacturer's instructions.
Installation and servicing should be performed only by qualified and experienced technicians to conform to
all local codes and to maintain your warranty.
Do not install the unit in an extremely hot or humid location, or in a place subject to dust or mechanical
vibration. The unit is not designed to be waterproof. Exposure to rain or water may damage the unit.
Any wall or ceiling mounting of the product should follow the manufacturer's instructions and use a
mounting kit approved or recommended by the manufacturer.
POWER SOURCES - This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your facility, consult your product dealer or
local power company.
HEAT - Situate away from items that produce heat or are heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers).
MOUNTING SYSTEM - Use only with a mounting system recommended by the manufacturer, or sold with the
ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may result in
the risk of fire, electric shock, or injury to persons.
ACCESSORIES - Only use accessories specified by the manufacturer.
CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
SERVICING - Do not attempt to service this unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.

Warranty and Service

Subject to the terms and conditions listed on the Product Warranty Card, during the warranty period Honeywell will
repair or replace, at its sole option, free of charge, any defective products returned prepaid. In the U.S.A. and Canada,
call 1.800.796.2288.
In the event you have a problem with any Honeywell Video product, please call Customer Service for assistance or to
request a Return Merchandise Authorization (RMA) number. Be sure to have the model and serial number, and the
nature of the problem available for the technical service representative. Prior authorization must be obtained for all
returns, exchanges, or credits. Items shipped to Honeywell without a clearly identified Return Merchandise
Authorization (RMA) number may be refused.
WEEE (Waste Electrical and Electronic Equipment). Correct disposal of this product
(applicable in the European Union and other European countries with separate collection
systems). This product should be disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures
Document 800-02460 Rev A
ACUIX IP Rugged Housing and Dome Installation Guide


Table of Contents

  Related Content for Honeywell Acuix IP Series

Table of Contents