Download Print this page

Explanation Of Symbols; Fcc Compliance Statement - Honeywell Acuix IP Series Installation Manual

Rugged housing and dome
Hide thumbs


Explanation of Symbols


FCC Compliance Statement

Information to the User: This equipment has been tested and found to comply with the limits for a Class B digital
device. Pursuant to Part 15 of the FCC Rules, these limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference. For example, try orienting or
relocating the receiving antenna, increasing the separation between the equipment and receiver, or connecting the
equipment to an outlet on a different circuit.
Document 800-02460 Rev A
The exclamation point in a red octagon is a WARNING. Failure to take or
avoid a specific action could result in physical harm to a person or
irreparable damage to equipment.
The lightning flash with arrowhead symbol within an equilateral triangle alerts
the user to the presence of uninsulated dangerous voltage within the
enclosure of the product that may be of sufficient magnitude to constitute a
risk of electric shock to the person.
The exclamation point in a yellow equilateral triangle is a Caution. Failure to
take or avoid a specified action could result in loss of data or damage to
equipment and may contain important operating and maintenance servicing
ACUIX IP Rugged Housing and Dome Installation Guide