Table of Contents
Advertisement
ACUIX IP Rugged Housing and Dome
Step 6: Install the Lower Dome onto the Housing
Step 7: Install the ACUIX IP Software and Configure the Dome
22
1.
Align the four screw holes on the lower dome with the four holes on the housing.
2.
Press the lower dome into the housing and turn the security screws using the
special hex key to secure to the housing.
Figure 1-8
Rugged Housing - Lower Dome
Security
screws
Refer to the
ACUIX IP High Speed Dome User Guide
1.
Install the Honeywell IP Utility and ACUIX Web-Client software, configure the
network and discover devices.
2.
If applicable, continue setting up and configuring other custom settings including
privacy zones and preset tours.
3.
If required or applicable, proceed to user configurations based on other hardware,
for example, a DVR.
Trim ring
to complete these steps:
Advertisement
Table of Contents
