Directed Electronics Python 450 ESP Installation Manual page 14

H2/2 LIGHT GREEN/BLACK (-) auxiliary output
This wire sends a negative pulse every time the remote start is activated. This can be used to pulse the disarm
wire of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to the disarm wire as shown
in the diagrams below. This wire can also be used as a special accessory output. (See Feature Descriptions section
of this guide.)
Relay for Negative (-) Disarm Wire Relay for Positive (+) Disarm Wire
14
© 2000 Directed Electronics, Inc. Vista, CA