Step 10: Install Filters; Step 11: Finalize Installation - GE Monogram ZV750 Installation Instructions Manual

10
Step
Install Filters
• Remove protective film on filters.
• Tip the filter into the lower slots at the
rear of the opening, lift the filter and pull
the knob forward until the filter rests on
the slots.
• Remove protective film covering the control
11
Step
• Refer to the Owner's Manual for
Finalize
Installation
panel on the front face of the hood and any
remaining packaging materials.
operating instructions.
Installation
36" Vent Hood
• To remove the filters, grasp the knob and
push the filter towards the rear and tilt
downwards.
11