Step 6 Install Motor; Step 7 Install Filters - GE Monogram ZV48T Installation Instructions Manual

STEP 6 INSTALL MOTOR

Outlet
Attachment
Slot
• From the inside of the hood, slip motor into the
attachment slot on the left.
• Rotate motor upwards until it snaps into the spring
clip on the right.
• Secure the motor to the hood with the machine
screw and lock washer. (Screw is marked with red
paint.)
Top
IMPORTANT: Connector ends
are designed to mate only
one way. Match flat and
round connectors as shown.
• Plug connector into the motor.
Installation Instructions
Spring
Clip
Attachment
Screw
Spring
Clip

STEP 7 INSTALL FILTERS

• Place filter drip trays into the rear of the hood.
• Insert the grease filter into the opening and drop
into the trays.
• To remove the filters, grasp the handle, push the
filter up and lift out.
14