Optional Sensor Port - 4 Pin Connector - Viper Responder LE 5701 Installation Manual

Security and remote start

Hide thumbs Also See for Responder LE 5701:

Table of Contents

Optional sensor port - 4-pin connector

Note: There is a shock sensor built onboard the main unit.

This connector is an optional sensor port to add sensors to the security system.

Optional sensors that may be used are: 508D Doubleguard Proximity Field Dis-

turbance, 509U Ultrasonic Sensor, 506T Glass Break Sensor, and 507M Digital Tilt

Sensor.

This input can also be used for a second 504D Doubleguard Shock Sensor, or for

additional pin and magnetic switches.

Alarm trigger inputs shorter than 0.8 seconds will trigger the WarnAway response,

while inputs longer than 0.8 seconds will trigger the Full Alarm sequence.

Note: You will need to add a 4-pin plug to interface with any hardwired switch-

es.

Table of Contents

Show Quick Links

Table of Contents