Table of Contents
Advertisement
Brake shutdown input
BROWN (+)
This wire MUST be connected to the vehicle's brake light wire. This is the wire
that shows (+) 12V when the brake pedal is depressed. The remote start will be
disabled or shut down any time the brake pedal is depressed. Note: This wire
MUST be used when installing this unit on a manual transmission.
(N/O or N/C) Hood pin shutdown input
GRAY
This wire MUST be connected to a hoodpin switch. This input will disable or shut
down the remote start when the hood is opened. It will also trigger the security
system if the hood is opened while the system is armed and report Zone 6. (See
Feature Descriptions, Menu #1 feature 11 for details about programming.)
(-) 200mA 2nd Status/defroster output
BLUE/WHITE
This wire supplies a 200mA output as soon as the module begins the remote start
process. The H3/1 BLUE wire can also be used to activate the defogger trigger
(latched/pulsed) 10-seconds after the remote start engages. (See the Feature
Descriptions, Menu#3, feature 11 for details about programming this output.)
4
© 2008 Directed Electronics—all rights reserved
Hide quick links:
Advertisement
Table of Contents
