Overriding The Optional Starter Kill - Viper 5501 Owner's Manual

Command
: Press
Feedback
:
Notes
:

Overriding the optional starter kill

To bypass the optional starter kill without a remote control:
Use your override switch located on the control center (see diagram below) to
bypass the system. This switch bypasses the system only if you have the vehicle
key.
To check proper operation:
1. While the vehicle is locked, open the door. Immediately insert the key into
the ignition and turn it to the run or on position (all the indicators in the
dash turn on).
2. Press and release the Override Switch one time. The optional starter kill is
bypassed. You can now start the vehicle with the key.
Note: The Override Switch feature allows you to select a specific number of
presses needed to unlock the system. If the Override Switch has been pro-
grammed to a new number of presses by your authorized dealer, that number
should be indicated below.
Override Switch Number ___________
© 2008 Directed Electronics. All rights reserved.
one- time and then press
Screen changes to unlock icon
Unlocks the system without chirps
.
21