Viper Responder LE 5701 Installation Manual page 69

Security and remote start
Hide thumbs Also See for Responder LE 5701:
Table of Contents

Advertisement

Menu 2 - Convenience features
Default settings are in bold.
2-1 One time bypass OFF: One time bypass ON. When programmed On the unit
will not passively arm for one cycle when turning the ignition on and off within 3
seconds. When going through this procedure the siren will chirp once indicating
that One Time Bypass has been activated.
2-2 NUISANCE PREVENTION® CIRCUITRY (NPC) ON: Nuisance Prevention Circu-
ity OFF. NPC stops repeated triggering of the same zone. If one zone is triggered
three times in one hour, that zone is bypassed for one hour, starting from the
time of the third trigger. During that hour, if the system sees a trigger on that
zone again, the system resets the one hour timer.
If one hour passes and the zone has not triggered again, the zone is activated
and can trigger the system again. NPC only monitors sensor inputs, and does not
bypass the door trigger or the ignition trigger at any time.
If NPC is turned off, the system will respond to repeated triggers on the sensor
inputs and will do so indefinitely. Some states have laws regulating how many
times a security system can trigger before it is considered a nuisance and the
vehicle is towed away.
2-3 Disarm from valet, 1 pulse . Disarm from valet, 2 - 5 pulses. The system can
be programmed to count the number of presses of the valet switch before disarm-
ing the security system. The factory default setting is one pulse. The unit can also
be set for two to five pulses.
2-4 Door trigger error chirp ON: Door trigger error chirp OFF. This feature con-
trols the error chirp that is generated if the system is armed with the door trigger
active. This is useful in vehicles that have a long dome light delay after the door
has been closed. If the system is armed before the dome light has turned off, the
security system will generate the door trigger error chirp. If this error chirp is not
desired, use this feature to disable the door open error chirp. If the error chirp
is turned off, no bypass chirp will be generated, even if a door is accidentally
left open.

© 2008 Directed Electronics—all rights reserved

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents