Engine Components Inspection And Servicing; Bearings; Oil Seals - HYOSUNG Prima Service Manual

● Using two steel tubes of appropriate size, press out
the engine mounting bushings on a vise as shown in
the illustration.
Bushing
Crankcase
ENGINE COMPONENTS
INSPECTION AND SERVICING

BEARINGS

Wash the bearing with cleaning solvent and lubricate
with motor oil before inspecting.
Turn the inner ring and check to see that the inner ring
turns smoothly. If it does not turn lightly, quietly and
smoothly, or if noise is heard, the bearing is defective
and must be replaced with a new one.
OIL SEAL
Damage to the lip of the oil seal may result in leakage of
the fuel-air mixture or oil. Inspect for damage and be
sure to replace the damaged seal if found.
Front side
Bushing
Rear side
Crankcase
ENGINE 3-14
Bushing