User Manual of Network Speed Dome
Dynamic Region: And the dynamic tracking refers to the ROI defined by
intelligent analysis such as human face detection. You can choose the Image Quality
Enhancing level for the ROI encoding.
Steps:
1. Check the check box of Enable under Dynamic Tracking.
2. Adjust the ROI level from 1 to 6. The higher the value, the better the ROI quality.
3. Click Save to save the settings.
6.5 Configuring Image Settings
6.5.1 Configuring Display Settings
Purpose:
You can set the image quality of the speed dome, including brightness, contrast,
saturation, sharpness, etc.
The parameters in Display Settings interface vary depending on the models of speed
dome.
You can double click the live view to enter full screen mode and double click it again to
exit.
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the speed dome.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
63