Configuring Video And Audio Settings; Configuring Video Settings - HIKVISION 5-inch High-definition Network Speed Dome User Manual
5-inch high-definition network speed dome
Hide thumbs
Also See for 5-inch High-definition Network Speed Dome:
- User manual (51 pages) ,
- Installation manual (53 pages) ,
- User manual (27 pages)
Table of Contents
Advertisement
User Manual of Network Speed Dome
6.4 Configuring Video and Audio Settings
6.4.1 Configuring Video Settings
Steps:
1. Enter the Video Settings interface:
Configuration >Basic Configuration > Video / Audio > Video
Or Configuration > Advanced Configuration > Video / Audio > Video
2. Select the Stream Type of the speed dome to main stream (normal), sub-stream
or third stream.
The main stream is usually for recording and live viewing with good bandwidth,
and the sub-stream can be used for live viewing when the bandwidth is limited.
Refer to the Section 6.1 Configuring Local Parameters for switching the main
stream and sub-stream for live viewing.
3. You can customize the following parameters for the selected main stream,
sub-stream or third stream:
Video Type:
Select the stream type to video stream, or video & audio composite stream. The
audio signal will be recorded only when the Video Type is Video & Audio.
Resolution:
Select the resolution of the video output.
Bitrate Type:
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure 6-24 Configure Video Settings
60
Advertisement
Table of Contents
