Configuring Osd Settings - HIKVISION 5-inch High-definition Network Speed Dome User Manual

User Manual of Network Speed Dome
You can set the Video Standard to 50hz(PAL) or 60hz(NTSC) according to the video
system in your country.
This function varies depending on the models of speed dome.
Other
 Lens Initialization
The lens operates the movements for initialization when you check the check box of
Lens Initialization.
 Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can
be set to 20, 40, 80, 160 and 320.
This function varies depending on the models of speed dome.
 Local Output
You can select the output mode to ON or OFF.

6.5.2 Configuring OSD Settings

Purpose:
The speed dome supports following on screen displays:
Zoom: Identifies the amount of magnification.
Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The
XXX following P indicates the degrees in pan direction, while the XXX following T
indicates the degrees in tilt position.
Time: Supports for time display.
Preset Title: Identifies preset being called.
Camera Name: Identifies the name of speed dome.
You can customize the on screen display of time.
Steps:
1. Enter the OSD Settings interface:
Configuration > Advanced Configuration > Image > OSD Settings
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
69