Configuring Network Settings; Configuring Tcp/Ip Settings - HIKVISION 5-inch High-definition Network Speed Dome User Manual

User Manual of Network Speed Dome
If there is the habit of adjusting clocks forward in your country in certain time
period of a year, you can turn this function on. The time will be adjusted
automatically when the Daylight Saving Time(DST) comes.
Steps:
(1) Enter the DST interface by Configuration > Advanced Configuration >
System > DST
(2) Check
(3) Set the date of the DST period.
(4) Click

6.3 Configuring Network Settings

6.3.1 Configuring TCP/IP Settings

Purpose:
TCP/IP settings must be properly configured before you operate the speed dome over
network. IPv4 and IPv6 are both supported.
Steps:
1. Enter TCP/IP Settings interface:
Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
to enable the DST function.
to save the settings.
Figure 6-6 DST Settings
46