Configuring Roi Settings - HIKVISION 5-inch High-definition Network Speed Dome User Manual

User Manual of Network Speed Dome

6.4.3 Configuring ROI Settings

Before you start:
ROI (Region of Interest) encoding is used to enhance the quality of images which are
specified in advance.
Stream Type:
You can set the ROI function for main stream, sub stream or third stream. Select a
stream type and then configure the ROI settings.
Fixed Region: The fixed region encoding is the ROI encoding for the manually

configured area. And you can choose the Image Quality Enhancing level for ROI
encoding, and you can also name the ROI area.
Steps:
1. Select a Region No..
2. Check the check box of Enable under Fixed Region.
3. Click
4. Adjust the ROI level from 1 to 6. The higher the value, the better image quality in
the red frame.
5. Enter a Region Name and click Save to save the settings.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
and draw a red frame in the live view image.
Figure 6-26 Region of Interest
62