Table of Contents
Advertisement
SpectraPure
Maintenance Regime:
the sediment and carbon pre-filters must be changed at 6-month intervals. If your water
contains a great deal of sediment or chlorine, the pre-filters may require more frequent
changes to maintain adequate production rate and extended membrane life.
Materials Required:
Procedure:
1.
Turn off water supply to the system.
2.
Using the provided filter wrench, remove the left clear sediment pre-filter
housing. Unscrew it counterclockwise as viewed from the bottom
3.
Remove the old filter from the housing and discard.
4.
Thoroughly wash the housing with a mixture of hot soapy water
and a few teaspoons of household bleach. Rinse well with clean
hot water.
5.
Install the new pre-filter onto the round port in the head of the housing, screw
the housing back onto the assembly, and hand tighten only .
6.
Proceed with carbon block filter replacement.
SpectraPure®Inc .
E-mail: spectra@spectrapure.com Visit us on the web www.spectrapure.com
SEDIMENT PRE-FILTER REPLACEMENT
For maximum contaminant removal and long membrane life,
1 micron MicroTec™ Sediment Filter (SF-MT-1-10)
Fax 480.894.6109 Fax us toll-free 1.877.527.7873
®
11
Advertisement
Table of Contents
Need help?
Do you have a question about the The Eliminator RO System and is the answer not in the manual?
Questions and answers