Advertisement
Setup
Figure 2
1.
Power down the PC
2.
Use the special "KVVM" (4-in-1) cable to connect the Sender unit to the PC.
a.
The end with the 4 connections connects to the PC
b.
The other end connects to the Sender via the DB25-15 connector labeled "INPUT"
NOTE: The connection between the PC and the Sender is NOT hot-pluggable.
3.
Connect the audio output from the PC to the audio input on the Sender via the "INPUT" label
on the Sender unit with a male-to-male mini-stereo cable
U97-H2 Sender Connector and Indicator Functions
- 3 -
Figure 3 Cable for connection to PC
Advertisement
