All-in-one console extender dual video, amplified or line-level audio, rs-232, and 3 separate usb extensions: two direct plus one with 4-port hub to 150 meters (500 ft) (20 pages)
(Model UH-2D-R). The device provides one local HDMI output and 3 sets of RJ45 pairs for connection to the remote receivers. The UH-2D-3S is compatible with HDMI™ versions 1.2a, 1.3 and 1.4 in terms of 3D, deep- color, and 4K video support. The remote receiver (UH-2D-R) includes state of the art automatic equalization to compensate for signal losses in the cables and produces a crisp image as clear as the original.
User’s Manual 2. Connection Block Diagram 3. Package Contents • One UH-2D-3S HDMI Splitter/Extender • HDMI input cable, 1m (3.28ft) • Power Cord with IEC320/C13 plug (some export models may not have this cord) • One User’s Manual 4. Controls, Functions and Indicators...
SP-HDMI-4A HDMI Input Connector Connect the HDMI SOURCE to this connector using the provided cable. UTP Output #1 thru #3 These outputs are labeled as A and B (on some units A is labeled as CAT6-1 and B as CAT6-2). The UH-2D-R remote receivers have corresponding RJ45’s. Connect A to A and connect B to B HDMI Output (loop out) Connect a compatible HDMI Display device to this connector.
User’s Manual Note about Twisted-Pair Cables For best results we recommend using Shielded 23 gague Cat6 cables (STP). Unshielded 23 gague Cat 6 Cables also provide acceptable results and can be used in noise free environments. Use TIA/EIA 568B straight through wiring termination. Avoid using Zero-skew or low skew cables.
SP-HDMI-4A 9. Specifications Input Port 1x HDMI Female (Type A) Output Ports 1x HDMI Female (Type A), 3 sets of 2 RJ45 connectors (total of 6 RJ45) Power Supply Internal 90-260 VAC, 50-60 Hz, with IEC320/C14 AC power jack Actual power consumption: 3.5 ~ 6 watts depending on # outputs plugged in at 1080p Video Resolutions PC Resolutions : VGA - SVGA –...