Advertisement
Quick Links
HDMI Video Extender with
Bidirectional IR, and RS232
Send HDMI, IR and full-duplex RS232
500 ft (150 m) on a single Cat6 cable
Model numbers covered in this User's Manual:
Individual Ends
UHBX-S
HDMI+RS232+IR UTP Sender
UHBX-R
HDMI+RS232+IR UTP Receiver
Kits
UHBX
HDMI+RS232+IR UTP Extender (includes Sender & Receiver)
© Copyright 2016. Hall Research, Inc. All rights reserved.
1163 Warner Ave Tustin, CA 92780, Ph: (714)641-6607, Fax (714)641-6698
User's Manual
UMA1238 Rev 1.0
Advertisement
Related Manuals for Hall Research Technologies UHBX-S
Summary of Contents for Hall Research Technologies UHBX-S
- Page 1 HDMI Video Extender with Bidirectional IR, and RS232 Send HDMI, IR and full-duplex RS232 500 ft (150 m) on a single Cat6 cable Model numbers covered in this User’s Manual: Individual Ends UHBX-S HDMI+RS232+IR UTP Sender UHBX-R HDMI+RS232+IR UTP Receiver Kits UHBX HDMI+RS232+IR UTP Extender (includes Sender &...
-
Page 2: Trademarks Used In This Manual
1.0 Introduction This manual covers UHBX-S and UHBX-R (together sold as UHBX) HDMI extenders manufactured by Hall Research. They extend uncompressed HDMI, bidirectional IR and full-duplex RS232 up to 150 meters (500 feet) using a single Cat6 cable. - Page 3 Each end is packaged separately and incudes a universal power supply (5v DC output), and a copy of this User’s Manual. 3.2 Sender Connections Figure 1 - UHBX-S Sender Connections 3.2.1 Sender Video Connection Connect the HDMI input to the source. The HDMI input connector on the box has a locking nut above it.
- Page 4 HDMI Extender with RS-232 and IR IR Detector Cable As the names imply the IR detector jack requires connection to a compatible IR detector cable. This device uses “pass-thru” IR detector cable that maintains the IR modulation. Compatible cables are available from Hall Research (Model Number CIR-DET-P2).
- Page 5 UHBX-Series 3.2.4 UTP (Twisted Pair Catx) Connection The extender is designed to be used with CAT6 UTP or STP cabling. However, CAT5e cables may be used but the maximum cable length will be reduced by approximately 20% depending on the quality of the cable. Augmented CAT6 cables can also be used, and are recommended for extension distances exceeding 140 meters (or >450 feet).
- Page 6 HDMI Extender with RS-232 and IR DB9-M Pin Term Direction Input Output 3.4 Setting the Distance Mode Mode UTP Length Notes 0 to 100 m (330ft) Default setting L.R. 0 to 150 m (500ft) Long Reach setting Supports maximum of 1080p@60 Hz, 8-bit. 1080p deep-color and 4Kx2K are not supported The extender has a mode setting that affects the maximum achievable extension distance.
-
Page 7: Troubleshooting
UHBX-Series 4.0 Troubleshooting If you are experiencing problems getting the extender to work properly, please use the following troubleshooting suggestions. Make sure that all of the connections on both the sender and the receiver are solid. Loose connections are the number one cause of issues. -
Page 8: Specifications
HDMI Extender with RS-232 and IR 5.0 Specifications Video Standards DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support) Signal type TMDS Connectors Locking HDMI Resolutions DVI signal VGA (640x480) thru WUXGA (1920x1200) HDTV signal 480i through 1080p Digital Cinema 4K (4096x2160) –...