Table of Contents
Advertisement
Outline of System
Outline of System
This unit is Video control equipment of 500 Series for delivering 8 Camera Image or DVD Image link up Z-
500 or Remote Controller(L-500) on Local at Monitor located in each Local area.
Features
Features
- 8 INPUT 6 BUS 21 OUT CHANNEL VIDEO MATRIX SWITCH
Remote conversion using communication is available and it is possible to check the currently selected Image
using control button on the front side.
- SELECT 8 VIDEOS INPUT / 6 BUS VIDEOS INPUT
- SELECT 8 CHANNEL VIDEO INPUT / 6 BUS VIDEO INPUT
If Input Mode switch on the rear side is set INPUT, it is got 8 Channel VIDEO. And if switch is set LINK, it is
got 6 BUS VIDEO.
- 6 BUS VIDEO LINKS OUTPUT
It is possible to output video to other V-500 equipment.
- 21 ZONE VIDEOS OUTPUT
It is possible to output video signals to the monitor located at Local.
- RS-422C PORT : SELECT C-500 BUS OUTPUT
It is possible to select VIDEO signal of each BUS by connecting with C-500 equipment.
- RS-232C PORT : SELECT Z-500 VIDEO OUTPUT
It is possible to select individually video signals in 21 zones by connecting with Z-500 equipment.
Operation Method
Operation Method
1. Connect the cables of other unit to connect to I/O terminal of this unit.
2. Convert the Input Mode Select Switch on the rear side to Input or Link.
3. Check normal operation by pressing the Power On/Off switch on the rear side.
4. If power is turned on, request bus data of C-500. If communication is impossible, restore former data.
5. Request MONITOR OUTPUT DATA of Z-500. If communication is impossible, restore former data.
6. Check VIDEO signals of Input, Bus and Output using the control button on the front side.
7. Set TFT LCD Monitor.
Cautions in assembling rack
Cautions in assembling rack
- Install and use only our RACK model when using this unit.
- Use standard DATA & VIDEO CONNECTION CABLE.
This unit is only for DC. Ensure to check supply voltage before use.
VIDEO MATRIX SYSTEM
3
V-500
Advertisement
Table of Contents
