Page 1
Operation Manual Professional Power Amplifier V-1000/2000/3000/4000 V-1000/2000 V-3000/4000...
Page 2
A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products.
8. The product is ready for operation. Slowly increase the level control to the desired operating level. Avoid illuminating the clip indicator and do not apply too much power to the speakers. 9. Operate the product and the system in a manner which does not illuminate the clip warning indicator. V-1000/2000/3000/4000...
-Forced air cooled(front panel intake, rear panel exhaust) -Front panel indicators for output signal, clip, protect and power (In V-1000/2000 Front panel indicators for clip, protect and power) -Rack ears for permanent installation in a standard 19”(rack mount width) enclosure...
PROFESSIONAL POWER AMPLIFIER Front Panel Front Panel V-1000/2000 V-3000/4000 1. HANDLES These are provided for easy transporting and installing into equipment enclosures or racks. 2. LEVEL CONTROL This control adjusts the level(amplitude) of the input signal for each channel. In stereo or parallel mode the knobs will determine the signal level independently for each channel.
Page 8
6. POWER SWITCH V-3000/4000 amplifiers have a combination AC switch/circuit breaker, V-1000/2000 amplifiers is separated AC switch and circuit breaker. The position of this switch determines whether the AC mains power is on or off.
1. AC INPUT Connect this product to an appropriate AC main power source using the supplied universal AC power cord. 2. CIRCUIT BREAKER (V-1000/2000) This protects the amplifier by shutting down the power when the amplifier operates abnormally due to overload or malfunction.
Page 10
The 30Hz position reduces the signal amplitude below 30Hz to conserve power and help protect the loudspeakers. The 50Hz position reduces the signal amplitude below50Hz to conserve power and help protect the loudspeakers. V-1000/2000/3000/4000...
PROFESSIONAL POWER AMPLIFIER Applications Applications Bridged Mono Installation Linked Installation In V-3000/4000, Linking is possible when in Stereo/Parallel or Bridged Mono operation. V-1000/2000/3000/4000...
PROFESSIONAL POWER AMPLIFIER Applications Applications Connections Inter-M products are wired according to professionally accepted wiring practices used throughout the world. 1. XLR INPUTS Balanced XLR connectors are wired as described: Pin #1 Shield Pin #2 Positive Pin #3 Negative XLR MALE 2.
To obtain specific warranty information and available service locations contact Inter-M directly or the authorized Inter-M Distributor for your specific country or region.
Page 20
Inter-M, Ltd. (Korea) began operations in 1983. Since then, Inter-M has grown to become one of the largest manufacturers of professional audio and commercial sound electronics equipment in the world. Inter-M has gained worldwide recognition for its own branded products, as well as private label manufacturing of electronics sold under other names (OEM).