Lcd Setting - INFOSEC 5000 User Manual

3-7. LCD Setting

There are three parameters to set up the UPS. Refer to following diagram.
Parameter 1
Parameter 2
List of 15 programs available for parameter 1:
Code Description
01 Output voltage
02 Output frequency
03 Voltage range for bypass
04 Frequency range for bypass
05 ECO mode enable/disable
06 Voltage range for ECO mode
07 ECO mode frequency range setting
08 Bypass mode setting
09 Battery backup time setting
10 Programmable output enable/disable
11 Shutdown point for programmable output
12 Hot standby function enable/disable
13 Battery voltage adjustment
14 Charger voltage adjustment
15 Output voltage adjustment
*Y (YES) means that this program can be set in this mode.
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 07 11 AA 59 203 09
Parameter 3
Parameter 1 is for program alternatives. There
are 14 programs to set up. Refer to the table
below.
Parameter 2 and parameter 3 are the setting
options or values for each program.
Bypass AC ECO
Y
Y
Y
Y
Y
Y
Y
Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y
Battery
CVCF Battery
Test
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y Y
Y Y
56