Operating Mode/Status Description - INFOSEC 5000 User Manual


14: Charger voltage adjustment
Interface

15: Output voltage adjustment
Interface

3-8. Operating Mode/Status Description

Operating mode/status
Description
AC mode
LCD display
Description
ECO mode
LCD display
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 07 11 AA 59 203 09
Setting
Parameter 2: Select Add or Sub to adjust charger voltage
Parameter 3: the voltage range is from 0V to 9.9V, the default
value is 0V.
NOTE:
*Before adjusting the voltage, be sure to disconnect all batteries
first to get the accurate charger voltage.
*We strongly recommend using the default value (0). Any
modification should be in line with battery specifications.
Setting
Parameter 2: Select Add or Sub to adjust inverter voltage
Parameter 3: the voltage range is from 0V to 6.4V, and the
default value is 0V.
When the input voltage is within acceptable range, the UPS will provide
pure and stable AC power to output. The UPS will also charge the
battery in AC mode.
When the input voltage is within voltage regulation range and ECO
mode is enabled, the UPS will bypass voltage to output for energy
saving.
60