Adjustment Of Chimney Connection - RAIS RONDO User Manual

ENGLISH RAIS - Manual for RONDO & MINO II

Adjustment of chimney connection

The stove is always delivered for top connection, but can be changed to rear connection
as follows:
Loosen the 3 M6 nuts with a wrench key.
Lift up the reflector plate, push out the knock-out,
and put the reflector plate back into place.
12
ENGLISH
Remove baffle plate and
smoke diverter (see clean-
ing and care).
Make sure that the flue
diverter is fastened to the
protective cover.
RAIS - Manual for RONDO & MINO II
Remove the casing knock-out.
Remove protective cover and seal and place over the
hole on the top - make sure that the seal is positioned
properly. Tighten the assembly using the 3 M6 nuts.
The flue outlet spigot, which you will find in a pouch
in the stove, and the holder for the upper flue diverter
are assembled with 3 M6x20 head cap screws and M6
nuts.
The upper flue diverter, baffle plate and top plate are
assembled in reverse order.
13