TOHATSU BFT200A Owner's Manual page 80

SERVICING YOUR OUTBOARD MOTOR
WATER SEPARATOR
ALIGNING SUSPENSION
MARK STRAP
13. Position the aligning mark as
shown in the figure when 
installing the suspension strap on
the water separator.
78
PROTRUDED PORTION
SUSPENSION STRAP
DRAIN JOINT
14. The drain joint should be 
positioned within the protruded
portion of the suspension strap as
shown in the figure.
15. Prime the engine using the 
priming bulb (p.37). Check for
fuel leaks. Repair any fuel leaks if
necessary.
If the buzzer sounds or water or
sediment accumulation is found in the
fuel filter, inspect the fuel tank.
Clean the fuel tank and tank filter if
necessary. It may be necessary to
drain the fuel tank completely and
refill with fresh gasoline.