Table of Contents
Advertisement
STAY
LOCK TAB
2 PIN
COUPLER
(BLUE)
DRAIN VALVE
WATER SEPARATOR BRACKET
5. Disconnect the 2 pin coupler (blue)
pushing up the lock tab.
6. Remove the 2 pin coupler (blue)
from the stay pushing up the lock
tab.
7. Remove the suspension strap from
the water separator bracket.
8. Bind the two fuel hoses with hose
clips to prevent fuel leakage, and
disconnect the fuel hoses.
2 PIN COUPLER (BLUE)
LOCK TAB
HOSE CLIPS
FUEL HOSES
DRAIN HOSE
WATER SEPARATOR
STAY
9. Bind the drain hose with the hose
clip, and disconnect the hose from
the drain valve.
10. Remove the suspension strap
from the water separator.
SERVICING YOUR OUTBOARD MOTOR
WATER SEPARATOR CUP
HOSE CLIP
SUSPENSION
STRAP
11. Remove the three screws holding
12. Reassemble the water separator in
O-RING (Replace)
SUSPENSION
STRAP
the water separator, empty the
water or deposits from the inside
of the cup.
the reverse order of removal. Use
a new O-ring.
TIGHTENING TORQUE:
2.5 lbf·ft (3.4 N·m, 0.35 kgf·m)
SCREWS
77
Advertisement
Table of Contents
