Ide Controller; Network Controller - NEC TM1200 User Manual

Real-Time Clock/Calendar
The real-time clock provides system clock/calendar information stored in a non-volatile
memory (NVRAM). The real-time clock battery provides power backup for the real-
time clock.
BIOS
A BIOS and Setup Utility are located in the Flash EPROM on the system board and
include support for system setup and PCI Plug-and-Play auto-configuration. A number
of security, reliability, and management features also have been incorporated to meet
vital server needs.

IDE Controller

The system includes a dual channel Ultra DMA 66 enhanced IDE interface controller.
The controller has a primary and secondary connector located on the system board, each
connector supporting a master and a slave device. The IDE controller provides support
for the internally mounted CD-ROM.

Network Controller

The system is delivered with a 10BASE-T/100BASE-TX network controller based on
the Intel 82559 Fast Ethernet PCI Bus Controller. As a PCI bus master, the controller
can burst data at up to 132 MB/sec. The controller contains two receive and transmit
FIFO buffers that prevent data overruns or underruns while waiting for access to the
PCI bus. The controller has the following:
n
32-bit PCI bus master interface (direct drive of bus), compatible with PCI Bus
Specification, Revision 2.1
n
Chained memory structure with improved dynamic transmit chaining for
enhanced performance
n
Programmable transmit threshold for improved bus utilization
n
Early receive interrupt for concurrent processing of receive data
n
On-chip counters for network management
n
Autodetect and autoswitching for 10 or 100 Mbps network speeds
n
Support for both 10 Mbps and 100 Mbps networks, capable of full or half
duplex, with back-to-back transmit at 100 Mbps.
The network status LEDs on the system board indicate:
n
Transmit/receive activity on the LAN
n
Valid link to the LAN
n
10/100 Mbps transfer mode.
System Overview 1-9