Before You Begin; Static Precautions - NEC TM1200 User Manual

System Cabling
This appendix contains information and procedures on cabling configurations used in
your system.
The cabling configurations include:
n
Standard Configuration
n
RAID Configuration.

Before You Begin

The DC push-button on/off switch on the front panel does not turn off
the system AC power. Also, +5vdc is present on the system board
whenever the AC power cord is connected between the system and
an AC outlet. Before doing the procedures in this manual, make sure
that your system is powered off and unplug the AC power cords from
the back of the chassis. Failure to disconnect power before opening
your system can result in personal injury and equipment damage.

Static Precautions

An electrostatic discharge (ESD) can damage disk drives, option boards, and other
components. You can provide ESD protection by wearing an antistatic wrist strap
attached to chassis ground when handling system components.
Electronic devices can be easily damaged by static electricity. To prevent damage, keep
them in their protective packaging when they are not installed in your system.
A-2 System Cabling
WARNING