Table of Contents
Advertisement
High Defi nition TV Satellite Receiver
11.6. Channels searching
This section describes the steps required for confi guring
the installation, the channel searching or maintaining lists
of channels.
Antenna confi guration
This menu lets you confi gure the receiver according to your
installation (simple, DiSEqC, Motor, Unicable).
and
keys let you to scroll through the choices.
Select your installation with the keys
options are:
None
Your installation is a simple installation, i.e. the receiver is
connected directly to the antenna.
In "Satellite" option, select the satellite to which the
antenna is oriented.
T he level bars will tell you if you have the satellite
signal and what is the strength and quality for each TV
channel.
By pressing the yellow key is shown the LNB Setup
submenu, where you can modify the off set of the LNB
(+1 V).
By pressing the blue key displays the submenu where
you can select Advanced Settings values " Auto",1, 2, 3, 4
and 5 for the "Repeat DiSEqC" option.
2 way splitter
Your installation has a 2 input DiSEqC switch, each
connected to an antenna oriented to diff erent satellites.
Select one of the two ports of the switch in the
"DiSEqC port" option and assign a satellite to
that port on the "Satellite" option.
the
other
port
and
The level bars will tell you if you have the satellite signal
and what is the strength and quality for each TV channel.
By pressing the yellow key is shown the LNB Setup
submenu, where you can modify the off set of the LNB
(+1 V).
By pressing the blue key displays the submenu where
you can select Advanced Settings values " Auto",1, 2, 3, 4
and 5 for the "Repeat DiSEqC" option.
4 way splitter
Your installation has a 4 input DiSEqC switch, each
connected to an antenna oriented to diff erent satellites.
It works the same as the 2 inputs.
or
. Possible
Then select
assign
another
satellite.
24
Advertisement
Table of Contents
