Product Specifications; Printing Specifications - Epson TM-P60II Technical Reference Manual

Product Specifications

Printing Specifications

Printing method
Dot density
Printing direction
Maximum print speed*
Printing width
Characters per line
Character spacing
Paper feed speed
2
Line spacing*
dpi: dots per inch
*1: The printing speed listed above are the values when using a new battery fully charged, the print density is
100%, and at normal temperature. The printing speed changes automatically depending on the battery remaining
amount and the head temperature.
*2: Initial setting. Programmable by commands.
• When changing the paper width, you need to install or remove the spacer and to change
• The maximum printing speed listed above may not be achieved depending on the type
• If the data transmission speed is slower than the maximum printing speed, or depending
• If the data transmission speed is slow, intermittent printing may occur and white lines
24
58 mm {2.28"} width paper printing
Thermal line printing
203 × 203 dpi
Unidirectional with friction feed
1
Receipt paper: 100 mm/s {3.94"/s}
Continuous label Paper: 80 mm/s {3.15"/s} (Recommended)
52.5 mm {2.07"}, 420 dots
Font A: 35
Font B: 42
Font C: 52
Font A/B/C: 0.28 mm {0.01"} (2 dots)
Approx. 100 mm/s {3.94"/s} (when feeding with the Feed button)
Approx. 3.75 mm {0.15"}
the setting for the paper width with the customized value. For details, see
Paper Width" on page 35.
of interface, the data transmission speed, and the combination of control commands.
Especially, the printing speed may change automatically depending on the
communication environment if using a wireless interface.
on the battery depletion and deterioration conditions and environment temperature, the
printing speed may fluctuate, and the print result may become shaded and/or dot
displacement in paper feeding may occur.
may be formed when printing graphics. To avoid this, keep the print speed constant by
setting it lower. The print speed can be set with the customized value. To set the
customized value, see "Software Settings" on page
60 mm {2.36"} width paper printing
54.0 mm {2.13"}, 432 dots
Font A: 36
Font B: 43
Font C: 54
"Changing the
46.