Print Density - Epson TM-P60II Technical Reference Manual

User NV memory capacity
• 1 KB (initial setting)
• 64 KB
• 128 KB
• 192 KB
NV graphics memory capacity
• None
• 64 KB
• 128 KB
• 192 KB
• 256 KB
• 320 KB
• 384 KB (initial setting)
Roll paper width
• 58 mm (initial setting)
• 60 mm
When changing the paper width, you also need to install or remove the spacer. For details,
see "Connecting the Printer" on page

Print density

Selectable from levels 1 to 13 (70% ∼ 130%) (initial setting: level 7)
Depending on the paper type, it is recommended to set the print density as shown in the table
below for the best print quality.
Original Paper Type
TF50KS-E, P31023, P35023
P30023, 150PSM
• If the print density is set to a darker level, printing speed may be reduced.
• If the print density is set to a darker level, paper dust accumulates on the print head and
print may be faint. For information about how to clean the thermal head, see
the Thermal Head" on page
43.
Density Level
7 (100%)
9 (110%)
74.
Chapter 2 Setup
2
"Cleaning
47