EpsonNet Config (Web Version)
EpsonNet Config (Web version) is a utility to configure the network and other settings on a web
browser.
Starting EpsonNet Config (Web Version)
Follow the steps below to start up EpsonNet Config (web version).
1
Start up a PC connected to the network.
2
Start up the web browser and input the printer's IP address (http://
printer's IP address) in the address bar as shown below.
• For the printer's IP address, see the status sheet. To print the status sheet, see
• A user name and a password will be required on the authentication screen. Enter
• In the initial setting, a warning message for authentication may appear when you access
EpsonNet Config starts.
http://xxx.xxx.xxx.xxx
Sheet Print Mode (Only for Wi-Fi Models)" on page
"epson" for both the user name and the password. You can change the password with
[Password] in the Optional configuration menu.
EpsonNet Config (web version) from a browser.
Chapter 3 Application Development Information
72.
"Status
3
61