Nv Graphics Print Mode; Nv Graphics Print Mode - Epson TM-P60II Technical Reference Manual

NV Graphics Print Mode

You can confirm the following information by running NV graphics print mode:
• Capacity of the NV graphics
• Unused capacity of the NV graphics
• Key code, number of dots in X direction, number
of dots in Y direction
For detailed information about NV graphics, see
Starting the NV graphics print mode
Follow the steps below to run this mode.
1
Install the roll paper.
2
Close the roll paper cover.
3
While pressing the Feed button, turn on the printer. (Keep pressing the
button until the printer starts printing.)
The printer starts printing the current status of the printer.
When the printer finishes printing the printer status, the following message is printed and
the Paper LED flashes. (The printer is now in the self-test wait mode.):
4
Press the Feed button. (Keep pressing the button until the printer starts
printing.)
The printer starts printing instructions.
5
After the printing has been completed, press the Feed button.
6
Press the Feed button again. (Keep pressing the button until the printer
starts printing.)
The printer starts printing the NV graphics information.
Turn the power off and on to return to the normal mode.
Chapter 3 Application Development Information
• Used amount of the NV graphics
• Number of NV graphics that are registered
• NV graphics data
"Select Modes by pressing Feed button.
Continue SELF-TEST: Less than 1 second
Mode Selection : 1 second or more"
"NV Graphics Memory" on page 22.
3
67